BACK TO HUB
Technical/January 23, 2026
Material Selection Guide: Silicone vs LSR for Medical Grade Gaskets
Technical Comparison: FKM vs NBR for EV Cooling Systems
| Parameter | FKM | NBR |
|---|---|---|
| Temperature Range | -20°C to +200°C | -40°C to +120°C |
| Compression Set (70 hrs @ 200°C) | 15-20% | 40-50% |
| Chemical Resistance | Excellent resistance to oils, fuels, and coolants | Good resistance to oils and fuels, poor resistance to coolants |
| Compliance Standards | IATF 16949, ASTM D2000, ISO 3601 | IATF 16949, ASTM D2000, ISO 3601 |
* 数据基于 IATF 16949, ASTM D2000, ISO 3601 标准测试
* FKM 在高温和化学耐性方面显著优于 NBR
Problem Statement: Silicone Compression Set Failure in Autoclave Sterilization
Medical gaskets require 1,000+ autoclave cycles at 134°C with steam exposure. Conventional VMQ silicone develops >40% compression set after 500 cycles, leading to seal failure.
Material Science Analysis
Standard VMQ silicone crosslinks degrade under cyclic steam exposure. Liquid Silicone Rubber (LSR) uses platinum-catalyzed curing for:
- Higher crosslink density (3.2x vs VMQ)
- Lower extractables (<0.5% per ISO 10993-5)
- Superior hydrophobicity (110° water contact angle)
Technical Specifications
- Material: Medical Grade LSR (USP Class VI)
- Shore A Hardness: 40±2
- Tensile Strength: 8.5 MPa (ASTM D412)
- Elongation at Break: 600%
- Temperature Range: -60°C to 200°C continuous
| Property | LSR (Platinum Cure) | VMQ (Peroxide Cure) | EPDM |
|---|---|---|---|
| Compression Set (500 cycles @ 134°C) | 12% | 43% | 65% |
| Steam Resistance (hours to failure) | 1,200+ | 400 | 150 |
| Extractables (ISO 10993-5) | 0.3% | 1.2% | 2.8% |
| Tear Strength (kN/m) | 35 | 25 | 18 |
Standard Compliance
RubberQ’s IATF 16949 system controls:
- Lot traceability with 100% material certification
- Cleanroom molding (ISO Class 7 per ISO 14644-1)
- Post-cure validation per ISO 13022
For custom material compound development or IATF 16949 documentation, consult RubberQ’s engineering department.
Need technical consultation?
Our engineering team can help apply these material insights to your specific project.
REQUEST A QUOTE